• 通风过滤器01800.0-00

    详细信息

     品牌:SKSING  型号:FF018  原理:加压过滤  
     性能:精密过滤  主体材质:塑料  外形尺寸:100 mm 
    风扇过滤器Sff018系列
     
    一、产品特色
    1、低噪音
    2、体积小
    3、多功能设计
    4、易安装
    5、防腐蚀,防紫外线
    二、技术参数

    轴流式滚珠风机
    使用寿命*小50,000小时
    连接方式 2 wries with pressure 2.5m㎡,length 100mm
    外壳材料 淡灰色塑料,UL94V-0,V-0防火等级
    机罩(风机过滤器和风机出风口) 淡灰色塑料,UL94V-0,V-0防火等级,防紫外线和防腐UL746C(f1)
    安装架 用工业双面粘合剂固定在外面的附件上,在确认操作的情况下可以用在另外的螺丝。
    过滤垫 过滤度94%,G4 acc.to DIN EN779,filtering degree 94% 
    过滤材料 高级合成纤维构造,100℃耐高温,F1型自灭材料,可循环清理洗涤或用吸尘器清理。
    操作/储存环境 -45 to+70℃(-49 to+158°F)
    防护等级 IP54/1(接地)
    可用F5过滤器增加保护等级到IP55,但会减少空气流量。
    三、产品示意图
     
    四、产品优点:
    1、安装架带粘性的封条阻止了灰尘和水进入到柜内。
    2、通风口多功能的设计有效阻止了掉落的灰尘和水,其优势是过滤垫不会很快的被灰尘弄脏,这样就不需要经常更换。
    3、风道使风机过滤器在操作中特别安静
    4、多功能和现代化的设计使安装时间减少。
    5、所有的风机过滤器,都有气流监控器。
    6、EMC版本和其他电压可按要求提供。
    7、空气的方向可以随轴流式风机方向的改变而改变。
    五、订货编码

    订货代号
    操作电压 空气流量 空气流量(带过滤罩) 电流 功率 平均噪音 箱体深度 开孔尺寸 重量
    01800.0-00 230VAC,50Hz 21m³/h 16m³/h 80mA 13W 31dB(A) 45mm 97×97mm+0.4 0.60kg
    01801.0-00 230VAC,50Hz 55m³/h 42m³/h 100mA 15W 40dB(A) 58mm 125×125mm+0.4 1.00kg
    01802.0-00 230VAC,50Hz 102m³/h 68m³/h 100mA 15W 39dB(A) 86mm 176×176mm+0.4 1.30kg
    01800.0-01 120VAC,60Hz 24m³/h 18m³/h 160mA 13W 31dB(A) 45mm 97×97mm+0.4 0.60kg
    01801.0-01 120VAC,60Hz 63m³/h 48m³/h 180mA 15W 40dB(A) 58mm 125×125mm+0.4 1.00kg
    01802.0-01 120VAC,60Hz 117m³/h 78m³/h 180mA 15W 39dB(A) 86mm 176×176mm+0.4 1.30kg
     
     
     
     
     
     
     
     
     
    FF018英文说明

    Filter Fan FF 018 Series
    Very low noise
    Minimal depth in enclosure
    Functional design
    Time-saving installation
    Weather proof and UV resistant
    Filter fans are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting air flow prevents formation of localised hot pockets and protects the electronic components from overheating. The plastic used for the hood of this filter fan series is highly weather proof and UV light resistant.
    Technical Data
    Axial fan, ball bearing service life 50,000h at 25°C / 77°F (65% RH)
      fan body aluminium, rotor plastic
    Connection 2 wires with pressure clamps 2.5mm², length 100mm
    Casing (filter fan and exit filter) plastic according to UL94 V-0, light grey
    Hood (filter fan and exit filter) plastic according to UL94 V-0, light grey;
      weather proof and UV light resistant according to UL746C (f1)
    Mounting frame with double-sided industrial adhesive band for fixing to the
      outside of enclosure; certain operating circumstances can
      make the additional use of screws necessary (see drilling
      template); a template for the enclosure cut-out is included in the
      delivery of the filter fans
    Filter mat G4 acc. to DIN EN 779, filtering degree 94%
    Filter material synthetic fibre with progressive construction; temperature
      resistant to 100°C, self-extinguishing class F1,
      moisture resistant to 100% RH, reusable - cleaning by
      washing or vacuuming
    Operating/Storage temperature -10 to +70°C (+14 to +158°F) / -40 to +70°C (-40 to +158°F)
    Operating/Storage humidity max. 90% RH (non-condensing)
    Protection type/Protection class IP55 / I (earthed)
    Special features
    The self-adhesive seal of the mounting frame prevents dust and water from entering the cabinet.Functional designof the intake and exit fan hoods very effectively prevents direct intrusion of falling water and dust. The advantage is that the filter mat does not get so quickly contaminated with dirt and thus does not need to be exchanged so often.The air channeling makes the filter fan particularly quiet in operation.Functional and modern designenables time-saving assembly and maintenance.
    The direction of air flow can easily be switched by reversing the axial fan (sizes 1 to 3).
    EMC versions and other voltages on request.
    Filter Fan FF 018 Series
    Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series
    Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series
    Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series
    Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series
    Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series
    Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series
    Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series Filter Fan FF 018 Series
     
     
     
     
     通风过滤设备01800.0-00
     
    Time-saving assembly and maintenance
    ´s filter fans are easily installed by one person from outside the cabinet. 1.) Make cut-out in the cabinet wall. The cut edge of the cabinet opening should be free of dirt, filings and grease. A template for the enclosure cut-out is included in the delivery of the filter fan. 2.) Remove protective film from the sealing strips on the mounting frame. Press mounting frame into the cabinet opening. The frame stays permanently in the cabinet. (For size 176mm and up we recommend additional screw fixing.) 3.) Electrically connect the axial fan using the clip connectors. Push the unit into the mounting frame. Fix using screws. 4.) Insert the filter mat in the hood. Clip on. Finished. Changing the filter mat or fan is quickly done by one person. To change the filter mat simply remove the filter hood, insert the new mat and snap the hood back again. No tools required. Maintenance of the fan can easily be done without removing the mounting frame (2).
    Exit Filter EF 118 Series
    Art. No. Depth in enclosure Enclosure cut-out Weight (approx.) Filter mat Protection type
    11800.0-00 16mm 97 x 97mm + 0.4 0.3kg G4 acc. to DIN EN 779, filtering degree 94% IP55
    11801.0-00 16mm 125 x 125mm + 0.4 0.4kg G4 acc. to DIN EN 779, filtering degree 94% IP55
    11802.0-00 16mm 176 x 176mm + 0.4 0.6kg G4 acc. to DIN EN 779, filtering degree 94% IP55
    Filter Mat FM 086
    Filter mat 89 x 89mm 118 x 118mm 168 x 168mm
    G4 (1 packaging unit = 3 pcs.) Art. No. 08600.0-00 Art. No. 08601.0-00 Art. No. 08602.0-00
    Technical drawing
     
     
  • 留言

    *详细需求:
    *手  机:
    联 系 人:
    电    话:
    E-mail:
    公  司:
    谷瀑服务条款》《隐私政策
深圳市欣广鑫科技有限公司 电话:0755-27198090 手机:18028716683 地址: 广东省深圳市龙岗区南联向银路安旭工业园5楼
内容声明:谷瀑为第三方平台及互联网信息服务提供者,谷瀑(含网站、客户端等)所展示的商品/服务的标题、价格、详情等信息内容系由店铺经营者发布,其真实性、准确性和合法性均由店铺经营者负责。谷瀑提醒您购买商品/服务前注意谨慎核实,如您对商品/服务的标题、价格、详情等任何信息有任何疑问的,请在购买前通过谷瀑与店铺经营者沟通确认;谷瀑上存在海量店铺,如您发现店铺内有任何违法/侵权信息,请在谷瀑首页底栏投诉通道进行投诉。