SCHOTT DURAN GL45螺旋盖（2管连接）

SCHOTT DURAN GL45螺旋盖（2管连接）:


GL45 cap connection system for the easy connection of flexible tubing to the DURAN GL45 bottles. The two polyproplylene connectors have angled top and straight underside connectors. The cap is ideal for use with soft elastic tubing that has an inner diameter of 6-9mm (such as Viton, Tygon, or other silicone tubing). An optional venting connector is available with, or without a syringe filter.
Highly versatile as the screw cap is based on the standard GL 45 thread. Grey polypropylene cap center rotates freely, allowing the bottle to be unscrewed without the need to disconnect the tubing. The angled top connectors prevent kinks in the tubing.Temperature resistant up to +140℃.Fully autoclavable and washer-proof.
Typical applications: Possible biotech applications include the transfer of sterile media from one container to another using a peristaltic pump.
 

货号	产品描述	DIN螺纹 GL	标准包装/数量
11 297 55	Screw cap GL 45 with 2 hose connections	45	2
11 298 29	Syringe Filter Connector only (without syringe filter) Female Luer Slip to 5.8 mm male connector with o-ring seal	-	2
11 527 52	40 mm ring gasket seal for GL45 mulifunction caps Circular EPDM Seals 1.5 mm thick with a 40 mm outer and 29 mm inner diameter	-	2

①Female Luer slip
②Syringe Filter Connector (11 298 29)
③5.8 mm connector with o-ring seal
④Connector suitable for tubing with 6-9 mm inner diameter
⑤5.8 mm inner diameter
⑥Connectors suitable for tubing with 6-9 mm inner diameter
⑦Syringe Filter with connector (11 298 25)
备注：由于该瓶盖系统较为复杂，详情请联系上海君翼仪器公司的客服。