MONO污泥切割机CB201CGT7A2

Liquid/ 介质: Sludge/污泥
Capacity/ 流量: Up to 40m 3 /hr Concentration/ 含固量: 1%
Suction/ 入口压力: Flooded S.G./ 比重: Assumed
Calculated Suction Losses: N/A Temperature/ 温度: Assumed 20 C
Delivery/ 出口压力: N/A NPSH(r)/ 气蚀裕量(r) : N/A
Differential/ 压差: N/A Viscosity/ 粘度: Not specified
Priming Time/ 启动时间: N/A pH: Not specifed
Build/Material Specification- 结构/ 材料 Drive Specification- 驱动参数
Casing/ 壳体: Cast Iron/铸铁 Absorbed Power/ 消耗功率: Variable
Cutters/ 刀片: AISI 4140 Installed Power/ 电机功率: 1.5 Kw
Spacers/ 隔垫: AISI 4140,
5.5 mm thickness
Starting Method/ 启动方式: D.O.L.
Drive Shaft/ 主轴: Grade 709M40 Drive Type/ 驱动方式: Fixed Speed/定速
Seal/ 密封: Mechanical Seal/机封 Electricity Supply/ 电源: 380 / 3 / 50Hz
Coupling/ 联轴器: Close Coupled/直联 Motor Enclosure/ 电机防护等级: IP55
Paint Finish/ 喷漆: Mono Standard Motor Speed/ 电机转速: 1450 rpm
Inlet/ 入口: 150 mm, BS4504, PN 16 Drive Speed/ 工作转速: 65 rpm
Outlet/ 出口: 100 mm, BS4504, PN 16 Control Panel/ 控制箱: Included/含
Base plate/ 底盘 Include/包含 Drive reference/ 驱动： SK30F - 90L4(N)